Instruction Manual

64
Caterpillar: Non-Confidential
will not build-up or enter the nozzle.
Be sure that the equipment is in good
condition before use, especially the soft
(hard) pipe connections, lubricate the joints
and ends, and make sure they are fasted
firmly. Before adding oil, first remove the
air from the lubrication gun to ensure that
no pressure is lost.
Use as follows：
At the junction of the soft (hard) tubes
and the lubrication nozzel, add lubrication
using the handle until the oil begins to seep
out.
For daily lubrication maintenance, refer
to the following pictures
Swing Stand and Rear Frame Joint
Swing Stand and Rear Frame Joint
Bucket, Articulated Boom and Hinged Bar
After the Articulated Boom Assembly Pin
Pin assembly in front of the dump bucket
After the boom pin assembly, the main
rocker pin assembly