Technical data

INSTALLATION Cont….
Read operating instructions before pulling shredder into operation.
Insert main plug in power socket.
Switching the paper shredder OFF
For NATIONWIDE SERVICE Call 1(800)225-9293
6
Open front door and pull out frame with bag for shredded material. Fold new bag around frame and
allow to, overlap by approximately 20cm. Push frame with guide and bag into bottom frame, close front
door.
Switchin
g
the
p
a
p
er shredder ON
Press rocker switch position 1
• Rocker switch locks in
• Paper shredder is ready for operation (standby)
Green LED on control panel lights
Feed paper (see "Technical Data" for sheet capacity)
• The shredding process is stated by a photo cell in the paper feeding opening.
When the paper feeding opening is free again, the cutting system
automatically switches off after approximately 3 seconds and returns to
standby.
Press rocker switch position 2
• Rocker switch resets
to zero position