Specifications

For NATIONWIDE SERVICE call 1(800)225-9293
12
INSTALLATIONS
 Place the shredder near the power outlet in such a way that the power plug is
easily accessible.
Note1: Do not install the shredder near heat sources such as radiator, flammable
liquids or gases.
Note 2: Do not install the shredder on uneven or unstable floor.
 Lock the front two casters.
Note: Before moving the shredder, make sure that the locks of front two casters
are released.
 Insert the plug into the outlet which means the specifications on the nameplates
(i.e. 120V ac, 15 Amps).
Make sure that no other equipment uses the same outlet.
 Attach a plastic bag firmly to the waste basket so that you can change the bag
without scattering paper chips.
Note: Make sure to remove the air between the plastic bag and the basket. If not it
may cause a malfunction of the sensor detecting waste volume level.