Specifications

For NATIONWIDE SERVICE call 1(800)225-9293
11
SAFETY FUNCTIONS Cont…
Alarm and Beep
(1) Acceptance Beep
It sounds on acceptance of key entry and when the machine status changes
(2) Alarm
Shred Runs by Start Key Press
The beep sounds intermittently every 5 seconds when paper or foreign articles are
detected near the feed opening while the shredder stops and the screen shown above is
displayed.
Note: If this status lasts for more than 3 minutes, the machine locks up
temporarily and Error 1 is displayed.
(3) Status Information Beep
In the following occasions, the information beep sounds to notify the status
change.
When the shredder starts evening out the waste chips
After detecting that the waste basket is full.
When the auto-cut function is activated and when the
machine restores itself.
When an error is generated;
Note: for details of errors refer to pages 22-23