Installation Guide

September 6, 2018

GENERAL INSTALLATION TOOLS

• Moisture Meter

• Tape Measure

• Pencil

• Chalk Line

• Hand Saw or Power Saw

• Tapping Block

• Crow Bar or Pry Bar

• Wood or Plastic Spacers (½”)

• Hammer or Rubber Mallet

FOR GLUE-DOWN INSTALLATION, YOU WILL ALSO NEED:

• Premium Wood Flooring Adhesive

• Adhesive trowel (as recommended by adhesive manufacturer)

FOR NAIL DOWN/STAPLE INSTALLATION, YOU WILL ALSO NEED:

• Manual or pneumatic 16-gauge floor nailer OR 16-gauge narrow-crown stapler

• 1 ¾” to 2” 16-gauge cleats or staples

• Finish nailer and/or finish nails

• Nail set

• 15 lb. felt or asphalt impregnated Kraft paper

• Crow bar or pry bar

• Color-matching wood putty/filler