Technical Specifications

Parts & Accessories

Direct-Temp Multi-Fuel Appliance Venting Solution

•Used when the vent pipe passes through a wall

Wall Thimble

Size Dimensions Part # Part # (Black)

A B C

3" DT-M 5.06" 9" 4.5" to 7" SC03WT N/A

4" DT-M 7.06" 11" 4.5" to 7" SC04WT N/A

Roof Flashings

•Used as a vertical roof penetration and support for flat roof installations

•Must be installed with a Storm Collar (ordered separately)

Size Dimensions Part # Part # (Black)

A B C D E

3" DT-M 5.5" 7.5" 12.5" 6.0" Flat to 2/12 Pitch SC03TCF N/A

3" DT-M 5.5" 7.5" 12.5" 6.0" 2/12 to 6/12 Pitch SC03TCFA N/A

3" DT-M 5.5" 7.5" 12.5" 6.0" 6/12 to 12/12 Pitch SC03TCFB N/A

4" DT-M 7.5" 9.5" 14.5" 6.0" Flat to 2/12 Pitch SC04TCF N/A

4" DT-M 7.5" 9.5" 14.5" 6.0" 2/12 to 6/12 Pitch SC04TCFA N/A

4" DT-M 7.5" 9.5" 14.5" 6.0" 6/12 to 12/12 Pitch SC04TCFB N/A

Size Dimensions Part # Part # (Black)

3" DT-M 5" 4526SS N/A

4" DT-M 7" 4726SS N/A

•Used with the Tall Cone Flashing or other roof flashing to provide support to vertical

installations

•May be tightened and sealed around the vent to prevent water from entering the

building

•Made from Type 304 Stainless Steel

304 Storm Collar

SUSI - Selkirk Universal Shielding Insulation

•Insulation used with Wall Thimble for increased performance and safety

2" (51mm) Insulatiion

wrapped around the

Wall Thimble

SUSI

Size Dimensions Part # Part # (Black)

Universal SUSI N/A

NOTE: add SUSI to this part for increased performance and safety