Technical Specifications

Elbows and Tees
®
Direct-Temp Multi-Fuel Appliance Venting Solution
1" - Clear Support Clamps
•Provides support to the DT-M system and establishes the required 1" clearance to
combustible materials
•Secured in place via worm gear clamps
Size Dimensions Part # Part # (Black)
A
3" DT-M 5" SC03SUP1 N/A
4" DT-M 7" SC04SUP1 N/A
Tee w/Vacuum Cleanout Cap & Shield
•Used to change the orientation of the vent from horizontal to vertical
•Allows any ash to be removed via a vacuum
Size Dimensions Part # Part # (Black)
A B C D
3" x 5" 3" 3.5" 3" 6.3" N/A 9316DTMB
3' to 4" 4" 4.5" 3" 6.3" N/A 9416DTM3B
4" x 7" 4" 4.5" 4" 7.3" N/A 9416DTMB
304 Support Clamps
•Used with horizontal systems to provide support at the required 6-foot intervals
•Support clamps by themselves do not maintain the necessary clearances to
combustible materials: be sure to consider clearances when planning the system
•Support clamps are sold in pairs to clamp around the vent and suspend from single
rod or cable, or used singularly as a saddle to rest the vent in
Size Dimensions Part # Part # (Black)
A
3" DT-M 5" 4527SS N/A
4" DT-M 7" 4727SS N/A
D
C
A
A
B
A
Supports
5 www.selkirkcorp.com