Technical Specifications

• Converts any conventional corn-burning or multi-fuel stove into a Direct Vent system.
• DT-M 3 x 5 and 4 x 7 systems easily connect to 3" or 4" flue outlets.
• Strong positive seal that's able to handle both positive and negative pressure direct venting applications.
• Laser-welded, double-wall system made from the toughest alloys.
• Concentric design eliminates the need for two separate penetrations.
Direct-Temp / Multi-Fuel (DT-M) Specifications
•Inner liner constructed of AL 29-4C Stainless Steel with built-in seal
• Outer jacket constructed of 409 Stainless Steel
• 1" clearance to combustibles
• Available in 3" and 4" diameters
• “Smart Choice" Lifetime Warranty
Direct-Temp / Multi-Fuel (DT-M) is a unique venting system designed to address the problem of highly
corrosive flue gases produced by burning corn or other bio-fuels.
Direct-Temp / Multi-Fuel (DT-M) Appliance Venting Solution
Typical Installations
Bio-Fuel Alternatives
• Corn
• Hulled wheat
• Soy beans
• Olive pits
• Cherry pits
• Bio-mass fuel grains
• Processed silage
• Grass Pellets
• Waste paper pellets
Through-The-Roof Installation Up & Out Installation Straight Out Installation
Tall Rain Cap
Termination Adapter
Storm Collar
Flashing
Firestop/Support
Trim Plate
DT-M Pipe Lengths
Wall Support Band
Combustion Air
Flex Pipe
Intake Tee
Tee w/
Vacuum Clean-out
Cap & Shield
Appliance Connector
Wall Support Band
Wall Support Band
Combustion Air
Flex Pipe
Intake Tee
Tee w/
Vacuum Clean-out
Cap & Shield
Appliance Connector
DT-M Pipe Lengths
(Black)
DT-M 90° Elbow
(Black)
Wall Thimble
DT-M Pipe Length
Termination
Adapter
Screened
Termination
Tee
Trim Plate
Combustion Air
Flex Pipe
Intake Tee
Appliance
Connector
Termination
Adapter
Screened
Termination
Tee
Trim Plate
DT-M
Pipe Length
Wall Thimble
Wall Support Band
x
= Items NOT included in Kits
x
x
x
x
x
x
x
x
www.selkirkcorp.com 2