PRODUCT CATALOGUE the connector pipe that links your Wood Stove to Insulated Chimney Remove the “Weak Link” in your wood heating system, install MODEL DSP Double Wall Stove Pipe.
Why Choose Double Wall Stove Pipe? Double Wall Stove Pipe was designed to work with your Stainless Steel Chimney to form a complete Wood Stove Venting system! Double Wall Stove Pipe is a superior product in a number of ways: • clearances are reduced to 6" from combustibles (vs 18" for single wall pipe) • it lasts significantly longer • high quality, scratch resistant black finish • adjustable Lengths mean no cutting pipe to fit your installation • Listed, Certified and Labeled to UL Safety Standards • Life
Model DSP Double Wall Stove Pipe is a connector pipe that links your wood stove to an insulated chimney. The connector is an important component of a woodburning system because its correct size, arrangement and installation improve the performance and safety of the heating system. Listed & Tested to ULC S641 and UL 103 Standards. Model DSP has an attractive outer black surface made of durable aluminized steel to withstand temperatures up to 1200 degrees F in continuous operation.
Parts & Accessories FIXED LENGTHS - Available in Lengths of 6", 12", 24" and 36". - 3 metal screws supplied with each Length. - For Installed Length, subtract 1-3/8" per joint. B A DIA. D C B LENGTH DIMENSIONS A B C D PRODUCT CODE PART NO.
Parts & Accessories STOVE ADAPTOR B A - May be required to adapt some stove flue outlets to Double Wall Stove Pipe. DIA. E 6" 7" 8" C D PART NO. PRODUCT CODE DIMENSIONS A B C D E 6" 7" 8" 6-1/2" 7-1/2" 8-1/2" 5-29/32" 6-29/32" 7-29/32" 7" 8" 9" 5-3/4" 5-3/4" 5-3/4" Selkirk U.S.A. Selkirk Canada 266243 267243 268243 DSP6SA-1 DSP7SA-1 DSP8SA-1 UNIVERSAL CHIMNEY ADAPTOR A B - Required for adapting Double Wall Stove Pipe to some insulated chimney systems. DIA. C 6" 7" 8" B A PART NO.
Parts & Accessories MODEL IWT INSULATED WALL THIMBLE - For installation to a masonry Chimney through a combustible wall. - Used to connect a single or Double Wall Stove Pipe to an existing masonry chimney or a relined masonry chimney with stainless steel liner. Framing Material (ie. Wood) A PART NO. Wall Material Hole Diameter “B” DIA. FRAMING DIMENSIONS PRODUCT CODE A Selkirk U.S.A.
Parts & Accessories 90 DEGREE ELBOW - Used to offset Double Wall Stove Pipe toward insulated chimney in a through-the-wall installation. - Non-positional connection system allows 360o rotation. C D E DIA. 6" 7" 8" A B PART NO. PRODUCT CODE DIMENSIONS A B C D E 6" 7" 8" 6-1/2" 7-1/2" 8-1/2" 5-29/32" 6-29/32" 7-29/32" 6-1/2" 7-1/2" 8-1/2” 9" 9" 9" Selkirk U.S.A.
Model DSP Offset Chart OFFSET This chart has three columns for elbow angle required to achieve your desired offset. The first column (“Offset”) represents the horizontal measurement, at the stove pipe centre line and the distance you want to offset. The second column (“height”) is the height of the assembled offset elbow to the top of the return elbow. Column three shows the appropriate lengths required. 1. Determine the distance of the offset required. 2.
