User manual

4-2. Update Process

①

Download the SNIPE PRO Update

Program to your PC from our

website (www.selfsat.com).

②

Download the newest satellite data to

your PC from our website .

③

Connect the controller to your PC using USB cable, then install the SNIPE PRO Update Program

you downloaded.

※

Download driver le, if your OS does not

support it.

※

Be sure your product location and download

correct location le.

Using SNIPE PRO Update Program, refresh the satellite data of your SNIPE PRO.

Update Program download

ii. Update the 10 satellites which are pre-stored

④

⑤

⑥

Run the SNIPE PRO update program.

Click “le” on left-upper side on program,

and click "open" to select folder which

contains downloaded satellite data.

Select folder and click the “OK” button.

⑦

When folder is opened, select le and

click the “Open” button.

⑧

⑨

The data of 10 satellites are shown to

you, but they are not modiable by

yourself.

Check the Port Setting, then click the

“CONNECT” button.