User`s guide

17
3. Use [△]and[▽] to select “D.DATE/TIME SET” and press [ENT].
4. Use [ ] and [ ]◁▷to move the cursor to month, date, year, and time.
5. Use [△]and[▽] to change the values for each one.
6. Use [ ] and [ ]◁▷to move the cursor to “DATE TYPE”.
7. Use [ ] and [ ] to select one from 3 types.△▽ (DD/MM/YY, MM/DD/YY, YY/MM/DD)
8. Press [ENT] to register the settings and exit the setting menu.
(There are 3 ways to arrange the “DATE TYPE” setting, and it varies in different
geographic areas. The types will be changed in a regular sequence of (DD/MM/YY
Æ MM/DD/YY Æ YY/MM/DD) as you press [ ] and [ ].△▽
4. To record a moving image
Use [△]and[▽] to select RECORD, and then press [ENT]. Then, it will appear with
the sight that’s being recorded as below and the Self-Guard starts to record images.
18
- Before you start to record, be sure to check from the LCD that the camera can
capture the sight where you want it to be recorded.
- Press [ESC] to stop recording and exit from the “RECORD” mode.
- If you are recording with more than one camera, you can select either a single-
channel mode or a 4 channel mode by pressing [▽] button.
z REC AV: Indication of recording both A (Audio) and V (Video).
Shows “REC V” when recording the video only.
z C1: Camera channel number 1 being used for recording.
If it shows C1345, then ‘C’ indicates of camera and 1345 indicates
for camera channel numbers.
If it shows C1B123, then ‘C1’ indicates of camera number 1 and
‘B123’ indicates of Bluetooth channel 1, 2 and 3.
z 13:40:34: current time.
z (10): elapsed recording time (10 minutes).
z 39%: 39 percent of the total memory(Built-in, RS-MMC, USB) is being
used for recording.
5. To Playback a Moving image
Use [△]and[▽] to select “SEARCH”, and press [ENT]. Then the next screen appears
as below.