User`s guide

Select a Bluetooth number that you want to connect with your Self-Guard using [ ]△

and [ ]▽ , and select “CONNECT” using [ ] and [ ]◁▷and then press [ENT] to start the

connection. If you want to change a slave Self-Guard’s Bluetooth ID, camera channel

number, and automatic connection ON/OFF information, use [ ] and [ ]△▽to select that

Bluetooth number. Use [ ] and [ ] to select “EDIT” and press◁▷ [ENT], then a new

window appears as below.

1. CONNECT: ON

You can turn ON or OFF the automatic connection function via Bluetooth when you go

into the “RECORD” or “TRANSMIT” mode.

2. REQ CAMERA: 1

If you connect to a slave Self-Guard wirelessly via Bluetooth, then you can request a

certain camera number to be transmitted from the slave Self-Guard wirelessly via

Bluetooth to your Self-Guard. For example, if you select 2 for the “REQ CAMERA”,

then you get images from the camera channel number 2 transmitted to your master

Self-Guard. If the camera channel number you have requested is not turned on, then

the slave Self-Guard will send the images of the camera channel which is turned on

and nearest to the requested channel number.

3. SLAVE PWD SET

If “5.BLUETOOTH” in “a.PASSWORD SET” from “F. OTHERS” is set to ON for the

slave Self-Guard and requires you to input password, then you have to put in the

correct password to access the slave Self-Guards wirelessly via Bluetooth with your

master Self-Guard. But if you have logged in the password beforehand, then you do

not have to input the password when you connect to the slave Self-Guards via

Bluetooth. If you press [ENT], then the next screen appears in the LCD as below. Put in

the password for the slave Self-Guard which you want to access for, and press [ENT].

4. 40:02:78:0C:60:C5

This is Bluetooth ID and you can change this ID using the direction buttons.

5-2. M/S: MASTER

The Self-Guard selected as a Master can be simultaneously connected to seven (7)

different slave Self-Guards at the same time. Use [ ] and [ ]◁▷to set the Self-Guards

either as a MASTER or a SLAVE. “A.CONNECT SET” can only be activated when you

select “

B.M/S:MASTER” as MASTER.

5-3. MY ID