User`s guide

USB memory in order to back up the data to the RS-MMC or USB memory under the

correct Self-Guard’s name in the RS-MMC or USB memory devices. Of all the data in

the USB memory backed up from the Self-Guards, Self-Guard is designed to search

only for the file, which has the same directory name in your Self-Guard and in the RS-

MMC or USB memory device. But, you can search the data of other Self-Guards

backed up in the RS-MMC or USB memory device with your Self-Guard if you change

your Self-Guard’s name to that specific Self-Guard’s, which you want to search with.

Then the searching program recognizes your Self-Guard as the other, and you can

search the data of the other Self-Guard.

You can change the name by using the direction buttons. Press [ENT] to save the

changed name, and press [ESC] to cancel the changed name.

RS-MMC or USB memory devices must be inserted into the Self-Guard when you

want to search for SG names registered in those devices. Select a SG name and

press ENT button to search for a file under the selected SG name.

Select either RS-MMC or USB and press ENT button to check the SG names

registered in each device.

I-5. BLUETOOTH (SG-300, SG-310 only)

When using the Bluetooth, you can get faster image transmitting speed by setting the

image compress resolution to 128x128 for the slave Self-Guards. The transmitting

speed goes down as you increase the image compress resolution and set it higher than

128x128. It is recommended to set the image compress resolution to 128x128 when

using the Bluetooth.

Select “BLUETOOTH” using the direction buttons, and press [ENT]. Then the next

screen appears in the LCD as below. To go to the previous menu, press [ESC].

5-1. CONNECT SET

This function is to connect a master Self-Guard to seven (7) other slave Self-Guards

wirelessly via Bluetooth, and “1.CONNECT SET” can only be activated when you

select “

B.M/S:MASTER” as MASTER. Move the cursor to “1.CONNECT SET”, and press

[ENT], then a new window appears with seven Bluetooth Numbers (BT1-BT7) that you

have logged in or the default set of IDs. These Bluetooth numbers are composed of the

Bluetooth ID, camera channel number, and automatic connection ON/OFF information.