User`s guide

57
This function decides on the audio recording methods. If this function is on, then the
Self-Guard starts to record sounds when it detects the sounds regardless of the
motions detected from the camera. If this value is off, then the Self-Guard starts to
record audio only in the case that the Self-Guard detects both the motions by the
camera and sounds by the microphone. When this value is set to CON, Self-Guard will
record audio continuously regardless of whether it detects an audio or not.
4-7-2-8. ON/OFF INFO
Shows up to 10 last history of power ON/OFF. The date and time is recorded for each
power on and off. If the power of the Self-Guard is gone abnormally such as, detaching
the battery from the Self-Guard during the operation, then the Self-Guard will not
record it in the power off history.
The black colored date/time (> 03/10 14:19:51) indicates you of the time that you
turned on the Self-Guard. The blue colored date/time (< 04/11 11:56:31) indicates you
of the time that you turned off the Self-Guard.
4-7-3. ALARM SET
If you set the alarm volume too loud, then that sound may be louder than the audio
detected by the Self-Guard’s internal microphone and the Self-Guard may not record
the audio accordingly. Be cautious when you set the volume to high level.
58
4-7-3-1. MOTION
Set up for alarm functions when the Self-Guard detects motions by the camera.
1. CHANNEL SET
Turns ON/OFF the alarm for each camera when the Self-Guard detects motion by the
each camera.