User`s guide

49
This option turns on and off the USB function. When you are not using the USB
memory device, turn it off to save the battery. Do not insert or remove USB memory
devices from the USB port in the Self-Guard while recording or searching.
When you connect an USB memory device to the Self-Guard, a new menu
(“REMOVE USB”) will appear in the main menu as below.
When you remove the USB memory device from the Self-Guard, you must exit from
“RECORD” or “SEARCH” mode, and select “REMOVE USB” from main menu and
press [ENT] button.
Cautions
: Do not insert or remove USB memory devices from the USB port in the Self-
Guard while recording or searching. When you remove the USB memory device from
the Self-Guard, you must exit from “RECORD” or “SEARCH” mode, and select
“REMOVE USB” from main menu and press [ENT] button. After “REMOVE USB
NOW” message appears on the LCD, you can remove the USB memory device
from the Self-Guard.
50
When you back up the Self-Guard’s data to your computer, first, copy the data in the
Self-Guard to a USB memory device, and then insert that USB memory device to the
USB port in the computer to copy the data in USB memory device to the computer. Use
only the USB cable provided in the package. It may cause damage to both the Self-
Guard and the computer if you connect the Self-Guard to the computer using other
USB cables directly.
4-6. MEMORY SET
Select “MEMORY SET” using the direction buttons, and press [ENT]. Then the next
screen appears in the LCD as below.
4-6-1. CAPACITY