User`s guide

21
minutes and 35 seconds from channel number 1. For 15224201.sgvx, ‘x’ means the file
is locked to protect from deleting. To lock or unlock the file, select “LOCK” and press
[ENT]. The locked files are not to be deleted before you unlock it. However, locked files
can be deleted if you do the format (“OPTION” mode → “6. MEMORY SET” → “2.
FORMAT”).
‘*.sgv’ indicates that it is a data of a moving image. ‘*.sgvx’ indicates that it is a locked
moving image, and ‘*.sgp’ is a snapshot image.
After selecting the file that you want to view, press [ENT].
Please refer to the General Guide for more details about viewing a moving image
.
6. BLUETOOTH (SG-300, SG-310 Only)
First, choose one Self-Guard as a SLAVE (to send the images) and the other unit as a
MASTER (to receive the images).
Steps to set the Self-Guard as a SLAVE:
1. For the fastest transmission of the data, set the recording resolution to 128x128.
2. Set “5. BLUETOOTH” -> “B. M/S: SLAVE
”
3. Check “C. MY ID” and write down the ID.
4. Select “1. RECORD”
Steps to set the Self-Guard as a MASTER:
1. Set “5. BLUETOOTH” -> “B. M/S: MASTER
”
2. Select “A. CONNECT SET”
3. Select “a. BT1/CH#1/OFF”
4. “1.CONNECT: ON
”
5. “4.00:02:78:0c:60:FF” ->change this ID to the SLAVE’s, which you have wrote down
for your record in step #3 in the "SLAVE"
6. Select “1. RECORD”
Please refer to the General Guide for more details about BLUETOOTH
.
22
GETTING READY
Self-Guard