Specifications

6-1. CONNECT SET

This function is to connect a master Self-Guard to seven (7) other slave Self-Guards

wirelessly via Bluetooth, and “1.CONNECT SET” can only be activated when you

select “

B.M/S:MASTER” as MASTER. Move the cursor to “1.CONNECT SET”, and press

[ENT], then a new window appears with seven Bluetooth Numbers (BT1-BT7) that you

have logged in or the default set of IDs. These Bluetooth numbers are composed of the

Bluetooth ID, camera channel number, and automatic connection ON/OFF information.

Select a Bluetooth number that you want to connect with your Self-Guard using [ ] △

and [ ]▽ , and select “CONNECT” using [ ] and [ ]◁▷ and then press [ENT] to start the

connection. If you want to change a slave Self-Guard’s Bluetooth ID, camera channel

number, and automatic connection ON/OFF information, use [ ] and [ ]△▽ to select that

Bluetooth number. Use [ ] and [ ] to select “EDIT” and press ◁▷ [ENT], then a new

window appears as below.