Specifications

63
You can prohibit people without the authority from accessing the Self-Guard by
creating a password for each function (BOOTING, OPTION, SEARCH, and RECORD).
You can turn each function on and off in “CHANGE PWD”.
Functions When each function is set with a password
BOOTING Put in the password for the Self-Guard to operate when you turn it on.
OPTION Put in the password to change various settings or options.
SEARCH Put in the password to search the data.
RECORD Put in the password to start recording.
BLUETOOTH Put in the password to access other Self-Guards via BLUETOOTH
The initial default password is “0000”. To change the password, first, put in the
password that you have been using so far, and then put in the new password.
The password reads as “****” as you put in the password. Using [ ] and [ ]△▽, choose a
number for your password, then the number reads as ‘*’, and the cursor moves to the
next position as you press [▷]. After you complete putting in all the numbers press
[ENT], and repeat the same process until you complete putting in all the numbers for
the password. Once you put in the correct value that matches with the old password,
you will be asked to put in the new password. Repeat the same process as above, and
enter the same password again to confirm the new password. You must press [ENT] to