Specifications

sure that this hole is not blocked in order to record the audio.

Battery Status & Charge Lamp: This lamp indicates how much of the battery is left.

Lamp with the green color indicates that the battery is full. The color of this lamp

changes into yellow when the battery is half full, and the red color means that the

battery is almost used up. If you connect the AC adaptor to the Self-Guard when the

battery is not full, then it automatically charges up the battery to its fullest. While

charging the battery, the lamp blinks with the green light. After charging is completed,

the lamp stops blinking and you will see the green light indicating that the battery is full.

Recording Status Lamp: This lamp is to check on the recording status. When the

Self-Guard is not in the “RECORD” or “TRANSMIT” mode, the color is green and the

color changes into red when the Self-Guard goes into recording or server mode. In the

“RECORD” or “TRANSMIT” mode, the color is still red if there is no motion detected by

the Self-Guard. But when the Self-Guard detects a motion, then the color turns into

yellow, and turns back to red. So if the Self-Guard continues to detect motions, then the

color alternates between red and yellow. If you turn on the audio detection function

(OPTION → 8.OTHERS → 2.POWER SET → 7.AUDIO DET), and audio is detected,

then this lamp blinks with red color.

Control Buttons

ESC: This button is to go to the previous menu from the current menu, or is to cancel

the selected values.

ENT: This button is to go to the selected menu or to apply the changed values.

△: This button is used to move up in the menu or to enter into the image magnification

mode in “SEARCH”, or to select certain values from the “OPTION” mode.

▽: This button is used to move down in the menu, or to enter into, or to select certain

values from the “OPTION” mode.

◁: In the menu, this button is used to move to the left or to select certain values.

▷: In the menu, this button is used to move to the right or to select certain values.

External Antenna Port: This port is to connect external antenna for Bluetooth. You can

transmit data about 80 – 100 meters using the built-in antenna. If you use the high gain

external antenna (SG-942), you can increase the transmit range up to 300 meters. And

the distance depends on the kind of antenna gain.