Specifications

10
it to a sudden change of temperatures, there is the possibility that
condensation can form on the exterior or on interior components.
Condensation can cause malfunction of the Self-Guard, so you should
avoid exposing it to conditions that might cause condensation.
¾ To keep condensation from forming, place the Self-Guard into the Carry-
Along Bag before moving it into a location that is much warmer or colder
than your current location. Leave it in the plastic bag until the air inside the
bag has a chance to reach the same temperature as the new location. If
condensation does form, remove the battery from the Self-Guard for a few
hours.
 Lens
¾ Never apply too much force when cleaning the surface of the lens. Doing
so can scratch the lens surface.
¾ Dust or any other soiling of the lens can interfere with proper image
recording. You can remove dust particles from the lens surface by using a
lens blower to blow them off. Next, wipe the surface of the lens with a soft
lens cloth.
 Others
¾ The Self-Guard may become slightly warm during use. This does not
indicate malfunction.
¾ If the exterior of the Self-Guard needs cleaning, wipe it with a soft, dry
cloth.