Specifications

89
you get images from the camera channel number 2 transmitted to your master Self-
Guard. If the camera channel number you have requested is not turned on, then the
slave Self-Guard will send the images of the camera channel which is turned on and
nearest to the requested channel number.
6-1-3. SLAVE PWD SET
If “5.BLUETOOTH” in “1.PASSWORD SET” from “9.OTHERS” is set to ON for the
slave Self-Guard and requires you to input password, then you have to put in the
correct password to access the slave Self-Guards wirelessly via Bluetooth with your
master Self-Guard. But if you have logged in the password beforehand, then you do
not have to input the password when you connect to the slave Self-Guards via
Bluetooth. If you press [ENT], then the next screen appears in the LCD as below. Put in
the password for the slave Self-Guard which you want to access for, and press [ENT].
6-1-4. 00:02:78:0C:60:C6
This is Bluetooth ID and you can change this ID using the direction buttons.
6-2. M/S: MASTER
The Self-Guard selected as a Master can be simultaneously connected to seven (7)
different slave Self-Guards at the same time. Use [ ] and [ ] ◁▷to set the Self-Guards
either as a MASTER or a SLAVE. “A.CONNECT SET” can only be activated when you
select “
2.M/S:MASTER” as MASTER.
6-3. MY ID