Specifications

4-9-9. SG NAME

This function is to put in the Self-Guard’s name, and used to back up the data of many

Self-Guards to the MICRO SD or USB memory devices (USB Memory or USB Hard

Disk). Self-Guard creates a directory name by the date, and the file name by the time.

So, if there already exists a directory name backed up to the MICRO SD or USB

memory from another Self-Guard, and you want to back up a directory created on the

same date by another Self-Guard, then the existing directory name in the MICRO SD

or USB memory gets over-written by the new data from the other Self-Guard. To

prevent this when you are backing up the data to the MICRO SD or USB memory

devices, you need to make a name for each Self-Guard, and create directory names for

all the Self-Guards in the USB memory in order to back up the data to the MICRO SD

or USB memory under the correct Self-Guard’s name in the MICRO SD or USB

memory devices. Of all the data in the USB memory backed up from the Self-Guards,

Self-Guard is designed to search only for the file, which has the same directory name

in your Self-Guard and in the MICRO SD or USB memory device. But, you can search

the data of other Self-Guards backed up in the MICRO SD or USB memory device with

your Self-Guard if you change your Self-Guard’s name to that specific Self-Guard’s,

which you want to search with. Then the searching program recognizes your Self-

Guard as the other, and you can search the data of the other Self-Guard.

You can change the name by using the direction buttons. Press [ENT] to save the

changed name, and press [ESC] to cancel the changed name.

MICRO SD or USB memory devices must be inserted into the Self-Guard when you

want to search for SG names registered in those devices. Select a SG name and press

[ENT] to search for a file under the selected SG name