Specifications

83
“Version” indicates of the Self-Guard’s version for its software and hardware.
4-9-7-1. SD DOWNLOAD
This function can be used only with the MICRO SD memory card for the use of
upgrades.
You can make a MICRO SD memory card to be upgradeable by copying an upgrade
file or a version file for each model to the MICRO SD card’s route directory.
Insert that upgradeable MICRO SD memory card into the memory card slot on the unit,
and select “1.SD DOWNLOAD”, then the Self-Guard automatically changes its version
to its latest. After that, Self-Guard reboots and finishes upgrading process.
If the MICRO SD memory gets detached from the unit or the power goes out
unexpectedly while upgrading the software, then separate the battery from the unit to
reboot the system and restart the upgrading.
4-9-8. DEFAULT SET
This function is to change the values set in all the menus back to its default set. Select
“YES” and press [ENT] to change all the values to the “DEFAULT SET”. Note that all
the values changed by the user will be deleted once you change the values back to the
“DEFAULT SET”.