Specifications

Self-Guard goes into sleep-mode again, but if there is a motion then the Self-Guard

start to record. This low-powering technology is very important when you are using the

battery as power source for the Self-Guard. In the case that you want to record objects

passing once and quickly before the Self-Guard, then turn off this function.

Caution: Set it to off when using the Remote Access (LAN) or the Bluetooth

4-9-3-4. ULTRA SAV: OFF

This function is used when you are using the battery to operate the Self-Guard, and to

maximize the battery’s life time. If you turn on this function, then the Self-Guard goes

into the Ultra Power Save mode if no motion is detected for 10 minutes. In order for the

Self-Guard to come out of this mode, it has to detect an audio. Self-Guard does not

come out of the Ultra Power Save mode even if it detects motions if you set on this

function. Accordingly, even if there is a motion detected by the Self-Guard, it does not

record data if there is no audio detected after the Self-Guard goes into this mode. Be

very careful of using this function in such places where there may be no audio detected

by the Self-Guard at all.

Caution: Set it to off when using the Remote Access (LAN) or the Bluetooth

4-9-3-5. VIDEO TIME: 5

You need to set the “VIDEO TIME” (0-9 seconds) to record the images when the

camera detects motions. For example, if you set the “VIDEO TIME” to 2, then the Self-

Guard starts to record the images from the camera for 2 seconds as soon as it detects

a motion. But if it detects another motion during recording the image for the previously

detected motion, then the recording time for that newly detected motion automatically

becomes another whole set value of 2 seconds.

Caution: If you set this time to 0, then the Self-Guard will not record any images even if

it detects motions.

4-9-3-6. AUDIO TIME: 5

This function sets for the audio recording time (0-9 seconds). When “AUDIO DET” is

set to OFF, then the Self-Guard starts to record audio only in the case that the Self-

Guard detects both the motions from the camera and sounds by the microphone. When