Specifications

50
the Self-Guard stops from recording video, and returns back to the initial menu mode,
displaying “STOP! MEM FULL” on the LCD screen. Press any button to remove this
message from the screen. If “1.AUTO OFF” (“4. OPTION” mode → “9.OTHERS” →
“3.POWER SET”) is not set to “0 minute” but instead, set to “1-9 minutes”, then the
Self-Guard automatically turns off its power after selected time gets elapsed.
BUILT-IN MICRO SD USB
Types of
Memory
Built-in Flash
Memory
Additional Memory Card USB Memory Stick or
USB Hard Disk
Memory Usage Sequence when “OVERWRITE” is “ON”
BUILT-IN MICRO SD USB Memory Usage Sequence
O - - BUILT-IN → BUILT-IN
O O - BUILT-IN → MICRO SD → BUILT-IN
O - O BUILT-IN → USB → BUILT-IN
O O O BUILT-IN → MICRO SD → USB → BUILT-IN
When “5.FILE LIM.” function is turned OFF, you cannot make “OVERWRITE” function
turned ON. To turn ON “OVERWRITE” function, it is required to turn ON “5.FILE LIM.”
function first.
Memory Usage Sequence when “OVERWRITE” is “OFF”
BUILT-IN MICRO SD USB Memory Usage Sequence
O - - BUILT-IN → Stop
O O - BUILT-IN → MICRO SD → Stop
O - O BUILT-IN → USB → Stop
O O O BUILT-IN → MICRO SD → USB → Stop
4-2-6. SCHEDULE
You can program the Self-Guard to reserve recording time schedule in 4 time frames
for a day. Press [ ] or [ ] to turn ON and OFF each schedule. You can ◁▷ preset each
schedule by pressing the [ENT]. If you turn off all options in the schedule menu, then
the Self-Guard turns on “1.ALL DAY” automatically. If you go into the Record Mode
outside of the preset recording time, then the LCD displays with “CHECK SCHEDULE”
message for 5 seconds, and goes into the sleep mode. When the time becomes for the