Specifications

114
TROUBLESHOOTING GUIDE
z Self-Guard shuts down its power for no reason.
The Self-Guard automatically turns off the power or goes into the power-savings mode if you
don’t press any button for a certain amount of time (1-9 minutes). This does not indicate
malfunction of the system. In “RECORD” and “TRANSMIT” modes, Self-Guard turns off only
the LCD, battery status LAMP, and recording status LAMP to save the battery. But, in the rest of
the modes except for “RECORD” or “TRANSMIT”, it turns off the power completely. Set the time
to 0 to deactivate “AUTO POWER OFF” function.
Caution: To maximize the life of the battery, do not turn off “AUTO POWER OFF”
function.
z I was unable to connect the Self-Guard to the network with the provided remote
connection program. (Professional Version_SG-1000/2000/3000)
1. In the menu “OPTION”, select “REMOTE SET” and set “LAN SET” to on.
2. First, confirm the network’s IP address connected to the Self-Guard. Then, select “SET IP
ADDR” from the menu “REMOTE SET” of the menu “OPTION”, and put in the correct IP
address. When connecting the Self-Guard to the network with the remote connection
program, put in the same IP address that you have used for “SET IP ADDR”.
3. From the menu “OPTION”, select “OTHERS”, and then select the “POWER SET”, set
both “SAVE AC” and “SAVE BAT” to OFF.
4. The Self-Guard can only be connected to a remote computer when it is either in
“RECORD” or in “TRANSMIT” mode. So, check if the Self- Guard is in either of those
two modes.
5. Exit from the remote connection program, and restart the program.
z Self-Guard is connected to the network, but I cannot access from my computer to
external cameras of the Self-Guard. (Professional Version_SG-1000/2000/3000)
From the “Channel” selection part in the remote connection program, select the camera number
that you want to connect the Self-Guard with. Among the six camera numbers, camera numbers
“1” and “2” are the internal cameras, and “3” to “6” are the external cameras. But you can only
access the cameras that are connected to the Self-Guard and turned on.
z Battery power fades quickly.
1. An external monitor can only be used in the “SEARCH” mode. If you don’t need an external
monitor, select “EXT MON SET” from the menu “OTHERS” of the menu “OTHERS”, and
set it off.
2. When you don’t need to access the LAN, select “LAN” from the menu “REMOTE SET” of
the menu “OPTION”, and set it off.
3. When you are not using the Bluetooth function, set “POWER” to off from the menu
“BLUETOOTH”. (SG-3000 only)
4. If there exists some external cameras, which you are not using, then set off all those
cameras from the menu “CAMERA SET” of the menu “OPTION”.
z If I connect the Self-Guard with the docking station or the adaptor, then the Self-
Guard turns on its power automatically.
Self-Guard has a function named, “automatic recovery function”, and it automatically turns on its
power when it is provided with external power sources. If there is an electricity (a power)
failure, Self-Guard automatically starts to use the power from its battery. But the Self-Guard
turns off its power, when it is not provided with the power from the adaptor for a long time, and
uses up the whole battery. And as soon as the electricity is available to the Self-Guard, it
automatically starts to charge the battery with electricity, and returns back to the modes just