Specifications

104
II-3. Remote Monitor and Save
This function allows you to see and hear the image and audio being recorded in the
Self-Guard, and save these data to your local computer.
“Server Name”: Type in the name of the Self-Guard that you want to connect to. (It is
the name for you to distinguish from several Self-Guards connected)
“IP Address”: Type in the IP Address of the Self-Guard that you want to connect to.
“User ID”: Type in the registered ID of the Self-Guard that you want to connect to.
“Password”: Type in the registered password of the Self-Guard to connect to
“Channel”: Select the camera number of the Self-Guard that you want to connect to.
(You must select a camera number, which is connected to the Self-Guard, or an error
message appears, if you select a camera number not connected to the Self-Guard.).
For the SG-3000 model, when slave Self-Guards are connected to the master Self-
Guard, then Bluetooth number is shows on “Channel”, so you can select number that
you want to connect.
After that, click “OK” button, then you are connected to the Self-Guard from your local
computer. You can add, modify, and delete the “Server Name”, “IP Address”, “User ID”,
and the “Password”.