Data Sheet

www.self-ecg.com
Page: 2 of 5
Specifications
Specifications：
In
Input
Other
Note
Note
Ambient
and Life
Protection
Output
Model
turn on time(S)
turn on time(S)
output current(mA)
output current(mA)
output current tolerance
output current tolerance
output current regulation
output current regulation
ripple current(mA)
ripple current(mA)
working voltage range(V)
working voltage range(V)
Max. output voltage(V)
Max. output voltage(V)
dimming interface
dimming interface
dimming range
dimming range
rated supply voltage(Vac)
rated supply voltage(Vac)
voltage range(Vac)
voltage range(Vac)
line frequency(Hz)
line frequency(Hz)
input current(mA)
input current(mA)
eciency
eciency
power factor
power factor
inrush current(Ipk)
inrush current(Ipk)
over voltage protection
over voltage protection
short circuit protection
short circuit protection
over temperature protection
over temperature protection
automatic restart
automatic restart
over load protection
over load protection
surge capacity
surge capacity
Ta(
Ta(℃
)
)
Tc max. (
Tc max. (℃)
audible noise(dB)
audible noise(dB)
Storage Temperature(
Storage Temperature(℃)
ambient humidity range
ambient humidity range
nominal life-time(hrs)
nominal life-time(hrs)
weight(g)
weight(g)
dimensions (L×W×H)(mm)
dimensions (L×W×H)(mm)
casing material
casing material
housing colour
housing colour
type of protection
type of protection
protection class
protection class
2
2
1
n/a
YES
YES
YES
YES
L-N: 1KV L,N-PE: 2KV
-20…50
90
20
-30...80
5%...85%RH，Not condensing
50'000@Tc
210
280x30x22
plastic
grey
IP20
Built-in
SLT80-350IL-EU
SLT80-350IL-EU
≤0.5
±10%
+/-5%
200
280
92.0%
295
92.0%
310
92.2%
320
92.5%
335
92.7%
350
92.8%
360
92.9%
375
93.1%
390
93.2%
400
93.4%
410
93.4%
410
93.3%
410
93.2%
410
93.1%
110-270110-270 110-266 110-258 110-250 110-242110-235110-228
210 220 230 240 250 260 270 280 290 300 310 320 330 340 350
420
No
n/a
220-240
198-264
50/60
0.90C
40A/140us
≤3%
3
1.Tolerance : includes set up tolerance, line regulation and load regulation.
2.Tested at full load,230Vac.Refer to"Power Factor" and "EFFICIENT"curve graphs.
3.Output LF current ripple (< 200 Hz)
4.All parameters NOT specially mentioned are measured at nominal voltage input, rated load and 25 of ambient
temperature.
5.The power supply is considered as a component that will be operated in combination with final equipment. Since
EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify
EMC Directive on the complete installation again.