Data Sheet

www.self-ecg.com
Last update:16 June, 2017
Page: 2 of 5
In
Input
Other
Note
Note
Ambient
and Life
Protection
Output
Model
Specifications
Specifications：
turn on time(S)
turn on time(S)
output power(W)
output power(W)
output votage(V)
output votage(V)
output voltage tolerance
output voltage tolerance
ripple voltage
ripple voltage
working current range(A)
working current range(A)
output safety rating
output safety rating
dimming interface
dimming interface
dimming range
dimming range
rated supply voltage(Vac)
rated supply voltage(Vac)
voltage range(Vac)
voltage range(Vac)
line frequency(Hz)
line frequency(Hz)
input current(mA)
input current(mA)
input power(W)
input power(W)
efficiency
efficiency
average efficiency
average efficiency
no load power consumption(W)
no load power consumption(W)
power factor
power factor
THD
THD
inrush current(Ipk)
inrush current(Ipk)
input over voltage protection
input over voltage protection
short circuit protection
short circuit protection
over temperature protection
over temperature protection
over load protection
over load protection
automatic restart
automatic restart
surge capacity
surge capacity
Ta(
Ta(℃
)
)
Tc max.(
Tc max.(℃)
nominal life-time(hrs)
nominal life-time(hrs)
Storage Temperature(
Storage Temperature(℃
)
)
ambient humidity range
ambient humidity range
weight(g)
weight(g)
dimensions (L×W×H)(mm)
dimensions (L×W×H)(mm)
casing material
casing material
housing colour
housing colour
connecting method
connecting method
type of protection
type of protection
protection class
protection class
30'000@Tc=90℃ 30'000@Tc=85℃
260
188×45×30
plastic
Grey+Blue
Terminal block
IP20
ClassII
1. At 230Vac,50Hz,full load.
2. Tolerance:includes set up tolerance,line regulation and load regulation.
3. At 230Vac,50Hz,full load.Refer to EFFICIENT Power Factor and THD curve graphs.
4. Calculate the model’s average efficiency for each test voltage by testing at 100%, 75%, 50%, and 25% of
rated current and then computing the simple arithmetic erage of these four values.
2
4
1
1
1
1
3
3
3
-20...+45
90
-20...+50
85
320Vac,1 hour.
In case of a short circuit on the secondary side,the ECG will switch off.
ECG switchs off if the temperature reaches a certain degree.
ECG works in pulsed light output mode.
After elimination of the fault condition the ECG will recover automatically.
L-N: 1KV
220-240
198-264
50/60
300
69
87.8%
82.8%
≤0.3
0.95
12%
35A/250us
≤0.5
60
12
+/-5%
90mVp-p
0-5
SELV
SLT60-12VLG-E
SLT60-12VLG-E
No
n/a
220-240
198-264
50/60
300
68
89.0%
86.7%
≤0.3
0.95
12%
35A/250us
≤0.5
60
24
+/-5%
40mVp-p
0-2.5
SELV
SLT60-24VLG-E
SLT60-24VLG-E
No
n/a
-30...80
5%...85%, Not condensing