User's Manual

Model 1150A DVOR
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3-77
3.8.13
RF Monitor Assembly (1A4A4)
Refer to Figure 3-73 and Table 3-17 for the indicators and controls on the RF Monitor assembly CCA.
Figure 3-73 RF Monitor Controls and Indicators
Table 3-17 RF Monitor CCA (1A4A4) Controls and Indicators
TP0 Ground
TP1
Detected Carrier Forward Power. The RF Monitor detects the forward power port of the
directional coupler.
TP2
Detected Carrier Reflected Power. The RF Monitor detects the reflected power port of the
directional coupler.
TP3
Detected Standby Power. The RF Monitor detects the power of the Standby Transmitter
applied to the internal dummy load.
DC Power
OK
This LED when lit (GREEN) indicates that the RF Monitor internal power supplies are
operating within limits.