User's Manual

Model 1150A DVOR
3-32 Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3.6.7.5 RMS Commands
The RMS Commands menu, shown in Figure 3-26 through Figure 3-30, provides system level controls for setting
the time and date of the VOR station to the PMDT PC’s current settings, changing the current user’s password,
setting the system’s Fan Control, setting the level of any of the Spare Digital Outputs, controlling the BCPSs,
resetting the Intrusion and Smoke Detectors, resetting the RMS hardware, and basic control of a co-located
1118/1119 DME if so equipped.
Refer to Figure 3-26. Note that if the VOR is connected to an RCSU, the Set Time and Date command will not
be available, since the RCSU updates the current time to all of its associated navaids to its system clock. If the
displayed time is incorrect, set the correct Time and Date at the RCSU itself.
Figure 3-26 RMS Commands