User's Manual

Model 1150A DVOR
3-24 Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3.6.7.4.1 General RMS Configuration Screen
The RMS’s General Configuration screen is shown in Figure 3-20. This screen allows the operator to configure the
general parameters of the VOR system.
Figure 3-20 RMS General Configuration Screen
The parameters in the General Configuration Screen must be set to correctly correspond to the equipment
installation at each site. Refer to the following table for details pertaining to each of the configurable parameters in
the General Configuration Screen. Note that some parameters are only applicable to Dual Equipment. In Single
Equipment systems, these parameters will not be displayed.