User's Manual

Model 1150A DVOR
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3-23
3.6.7.4
RMS Configuration Screen
The PMDT contains the following RMS Configuration Screens that are used to define the operating parameters for
the RMS.
NOTE
Any changes to the backplane switches must be followed by cycling the DVOR rack power
or pressing the Reset on the LCU to make the changes take effect.
Any configuration changes intended to remain after subsequent power cycling or system resetting MUST be backed
up before cycling/resetting.
To backup the current configuration stored in RAM for non-volatile storage in EEPROM, login to Security Level 3
or higher and select RMS >> Configuration Backup. Press OK at the prompt.
To save the current RMS configuration to a hard drive or other media, select System >> Configuration Save. Select
the destination and file name and press Save.
To restore a saved configuration, select System >> Configuration Load, locate the desired configuration file and
press Open. When completed, backup the configuration to EEPROM by selecting RMS >> Configuration Backup.
Press OK at the prompt.
A hardcopy of the station's configuration can be printed using the System >> Configuration Print menu option.