User's Manual

Model 1150A DVOR
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3-21
3.6.7.3.4
Command Activity Screen
The Command Activity Log Screen is shown in Figure 3-18. This screen provides the latest 100 commands issued.
When 100 or more commands have been issued, subsequent commands will replace the oldest commands in the log.
The Command Activity Log screen specifies the date and time, identifies the operator logged on to the system when
the command was issued, and the command that was issued. In addition to the User IDs configured in the Security
Screen, the User Name field includes the following names:
Local User Commands issued through the buttons on the LCU front panel.
GUEST Commands issued from the default Security Level 1 GUEST account.
RCSU Commands issued from the Remote Control Status Unit.
Op System Commands issued from the RMS’s Operating System.
The Update button reloads the log file from the RMS and updates the display with any new entries. The Reset
button clears the log file in the RMS.
Figure 3-18 RMS Command Activity Log Screen