User's Manual

Model 1150A DVOR
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3-7
To maintain system security, this default user account information should be changed by the authorized personnel.
NO
TES
After 3 failed attempts to logon (ie. invalid User ID or Password), further logon attempts will be
blocked for a period of 5 minutes.
The PMDT software contains an Activity Detector feature that will automatically log off a user
after 15 minutes of inactivity (either mouse or keyboard activity). This feature is disabled when
the system is in Local Mode.
3.6.6.2
PMDT Logon via Direct or Modem Connection
To log on to the equipment directly, select System >> Connect >>Serial/USB. The PMDT Login screen (Figure 3-5)
will be displayed. Enter a valid User ID and the associated password and press OK.
To log onto the equipment remotely, select System >> Connect >> Modem. Unless the Leased Line Modem option
has been enabled in the PMDT Configuration screen, the System Directory screen will be displayed as shown in
Figure 3-3. This directory stores the Station Identifier and Phone Number for the last 100 systems called. Either
select an entry from the Contacts list, or press the “Add Entry” button to enter a new phone number.
The “Change Dialing Properties” and “Change Modem Properties” buttons can be used to configure various
Windows-based modem properties, such as using a calling card or handling specific area code rules. Refer to
Windows Help for the associated screens.
Once the phone number and connection properties have been set, pressing the Dial button initiates the call. Once the
PMDT’s modem connects to the navaid’s modem, the PMDT Login screen (Figure 3-5) will be displayed. Enter a
valid User ID and the associated Password and press OK.
To remove a contact from the list, select the contact and press the delete entry button.
Figure 3-3 PMDT System Directory