User's Manual

MODEL 2130 MARKER BEACON
Rev. A April, 2005 2-15
This document contains proprietary information and such information may not be disclosed to others for any
purposes without written permission from SELEX Sistemi Integrati Inc.
Addr = 80 Write Read
Bit 0 Monitor Enable 1 Monitor Enable 1
Bit 1 Monitor Enable 2 Monitor Enable 2
Bit 2 Monitor Enable 3 Monitor Enable 3
Bit 3 Monitor Enable 4 Monitor Enable 4
Bit 4 Monitor Logic (And/Or) Combined Monitor Logic (And/Or)
Bit 5 Maintenance Alert Shutdown/Log Error
Bit 6 Remote Fault Transfer In Process
Bit 7 Hot Standby Standby Shutdown/Enable Restart
Addr = 81 Write Read
Bit 0 Internal Monitor Bypass Internal Monitor Bypass
Bit 1 Standby Monitor Bypass Standby Monitor Bypass
Bit 2 Set Interlocked OFF LED Interlocked OFF LED State
Bit 3 Reserved Reserved
Bit 4 Reserved VCO #1 +12V Sense
Bit 5 Reserved VCO #2 +12V Sense
Bit 6 Main 1 Selected Main 1 Selected
Bit 7 Alarm Silence Alarm
Addr = 82 Write Read
B0 Reserved Integral Monitor Alarm
B1 Reserved Integral Monitor Alarm Mismatch
B2 Reserved Standby Monitor Alarm
B3 Reserved Standby Monitor Alarm Mismatch
B4 Reserved Reserved
B5 Reserved Reserved
B6 Reserved Reserved
B7 Reserved Reserved
Addr = 83 Write Read
Bit 0 Reserved Antenna 1 +12V Switch Sense
Bit 1 Reserved Antenna 2 +12V Switch Sense
Bit 2 Antenna 1 ON 1
Bit 3 Antenna 2 ON 2
Bit 4 Load 1 Power Fail 1
Bit 5 Load 2 Power Fail 2
Bit 6 Off 1 Antenna #1 Selected
Bit 7 Off 2 Local/Remote*
Addr = 84 Write Read
Bit 0 Reserved Reserved
Bit 1 Reserved Reserved
Bit 2 Reserved Reserved
Bit 3 Reserved Reserved
Bit 4 Reserved Reserved
Bit 5 Reserved Reserved
Bit 6 Reserved Reserved