Specifications

LD600-12 Manual Selectronic Australia
6
Getting Started Quickly
If you want to get powered up quickly here are the 11 simple steps.
1. Familiarise yourself with the details in the first 6 pages on this manual.
2. Unpack the LD600-12 from the packaging.
3. Check unit for any damage that may have resulted during transport, if any
damage is evident report this to your supplier immediately.
4. Make sure the LD600-12 ON/OFF switch (12) is in the off position.
5. Connect battery positive wire (red) (10) to battery positive or battery
fuse.
6. Connect battery neg. wire (black) (11) to battery negative or battery fuse.
7. Plug a 230 - 240V appliance into inverter front power point (8) but do
not switch on.
8. Turn ON/OFF switch (12) to ON.
9. After 3 seconds LED (1) will begin to flash. If no LEDs light, check for
correct connection to battery.
10. Turn power point (8) on
11. You‟re away.
LD600-12 Parts Identification
LED (1)
LED (2)
LED (3)
LED (4)
ON/OFF Switch (12)
LED (5)
Mode Button (7)
(8) Power Point/GPO
Positive (Red) Battery lead (6) can be viewed from the rear.
Negative (Black) Battery Lead (7) can be viewed from the rear.