Specifications

LD600-12 Manual Selectronic Australia
3
Portable Use
By using optional battery clips, the LD600-12 can be connected directly to
a vehicle battery. When using Alligator clips ensure they have a tight grip
around the battery post. Wherever possible battery connections should be
bolted. If connecting the LD600-12 through a cigarette lighter socket the
maximum power output of the LD600-12 will be severely restricted, this
practice should be avoided. Check with your supplier or installer if you are
unsure.
Do not use alligator clips in a moving vehicle
Auxiliary Battery
Earth (to chassis)
LD600-12 Inverter
Start Battery
Earth (to chassis)
Isolator
Vehicle
Alternator
By incorporating an auxiliary battery in the manner above, the starting battery
should remain charged for vehicle starting (see your auto electrician).
The LD600-12 has sufficient battery cable length to allow it to sit underneath
the vehicle whilst in use. If the ground is wet, place the LD600-12 on a
waterproof liner.