Specifications

LD600-12 Manual Selectronic Australia
1
Introduction
Thank you for choosing to purchase the Selectronic LD600-12 TRUE
SINE WAVE inverter. Many hours of Research and Development have
gone into the LD600-12 to ensure this inverter provides you with many
years of reliable service
Warranty Card
It is imperative that you complete your warranty card NOW. Your LD600-
12 is covered by a TWO year warranty; this warranty is in addition to your
rights under the trade practices act of your state or territory.
Returning you completed warranty card will enable us to register your
warranty and avoid any possible delays should service be required. If you
have any comments about our product that will not fit on the warranty card
please feel free to drop us a line. Yes, constructive criticism will also be
welcome.
Installation
200mm
200mm
200mm
LD600-12
Inverter
Front
200mm
LD600-12 Inverter
Please leave a clearance of 200mm on all sides and top of the Inverter.
The LD600-12 must be installed in a dry, cool and dust-free environment.
It is recommended that the inverter be placed as far from any radio
receivers as possible.