Specifications

LD600-12 Manual Selectronic Australia
16
LD600-12 Specifications
Inverter Type Microprocessor control circuit with PWM full bridge power
stage. True sine wave AC output
Current draw from Battery
Condition
Amperage
Demand Start SLEEP mode (average)
Inverter ON, with no Load
Maximum Continuous Load (600 Watt)
Half hour rating (800 Watt)
Surge rating (1500 Watt)
0.06 Amps
0.54 Amps
60Amps
 80Amps
147 Amps
Inverter Power Ratings @ 25º C
Condition
Total Inverter output
Wattage @ 1.0pf
Current
Continuous
Half hour rating
Surge rating (5 seconds)
600 Watt
800 Watt
1500 Watt
2.4 Amps
3.3Amps
5.4 Amps
Demand Start
Type
Minimum Load to Start
Response Time
Pulsing AC
4 watts – 16 watts user adjustable
1 second maximum
Battery Voltage Range
Voltage
Low DC Volts Cut Out–10 second delay
Low DC Volts Cut In
High DC Volts Cut Out–Instantaneous
10 – 11.5 volts user adjustable
12 volt
17 volts