29"COLOUR TELEVISION USER'S MANUAL Model No. :SL2910PB Before operating this colour television, please read these instruction completely.
SPECIFICATIONS Receiving System: Colour System: Picture Tube: Ext. Antenna: Ext. In/Out: Speaker: Audio Output: M, N PAL-N/M NTSC-M 74cm (29") diagonal 75 Ohm Coaxial Cable Audio/Video-In/Out 2 speakers STEREO:>3W <5W*2 Power Consumption: Dimension: Net Weight: AC 110-220V 50-60Hz, 150W 860(W) x 399(D) x 614.5(H) mm 41.2 kg REMOTE CONTROL Transmitting System: Power Supply: Dimension: Net Weight: Infrared DC 3V (1.
SAFETY PRECAUTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Power-supply cords should be routed so that they are not likely to be walked on or nagged by items placed upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product. When the power cord or plug is damaged or frayed, unplug the TV from the wall outlet and refer servicing to your authorized dealer.
CONTROL PANEL BUTTONS 1. 2. 3. 4. 5. 6. 7. 8. 9. Power Button Power Indicator & Remote Sensor Speakers Standby Button AV/TV Button Menu Button Volume Down/Up Button Channel Down /Up Button Video In2(Option) AV Out(Option) YUV(Y,Cb,Cr)In (Option) S-Video In (Option) Antenna Input Socket (75 ohm) 10. AC Power Cord 11.Side Video In(Option) 4 5 6 7 7 8 8 3 1 10 2 3 11 9 Power Connection Only use the adaptor supplied with this product, connect the AC plug to the socket at the back of the TV.
Connecting the Aerial(or Cable Television Network) To view television channels correctly ,a signal must be received by the set from one of the following sources: *An outdoor aerial *A cable television network Plug the aerial or cable network input cable to the 75 coaxial socket on the rear of the television.
Connecting to the Audio/Video Input/Outputs YUV IN AV IN 2 AV OUT Y VIDEO VIDEO Cb LEFT LEFT Cr RIGHT RIGHT 75 ANT S-VIDEO Cable Television Network AV IN 2 VIDEO V V LEFT L L RIGHT R R L L R R YC YC Y Y Cb Cb Cr Cr L L R R LEFT VCR Decoder/ video game device Video disc player S-VIDEO RIGHT Camcorder YUV IN Y Cb LEFT Cr RIGHT TV AV OUT VIDEO Satellite receiver V V LEFT L L RIGHT R R Amplifier VCR 5
PERIPHERAL EQUIPMENT CONNECTIONS There is a wide range of audio and video equipment that can be connected to your TV. Connection diagrams at the end of this section show you where the different equipment should be connected at the backside of the TV. Aerial socket 1. Connect the RF out socket of the VCR to the aerial socket on the back of the set. 2. Connect the aerial cable to the RF aerial in socket of the VCR. 3. Select the program number where the VCR channel is stored. 4.
USING THE REMOTE CONTROL Batteries Please follow the below instructions to install the supplied batteries into the remote control to make it operate. 1. Remove the battery cover. 2. Insert two 1.5V (AAA size) batteries making sure The polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Replace the battery cover. Precautions when using batteries Do not use old and new batteries together.
REMOTE CONTROL BUTTONS Mute Button 2 Digit Buttons Channel Selection Button Volume up/down Buttons 4 5 6 7 8 9 -/-- 0 AV/TV AV/TV Button Channel up/down Buttons CH.+ VOL.- MENU VOL.+ CH.- Menu Button RECALL Recall Button Power Button (Standby) 3 Personal Presets Button P.P SYS.
Remote Control Buttons 1.POWER (STANDBY) BUTTON ( ) Press this button to turn the TV on/off. 2.MUTE BUTTON ( ) Press this button to temporarily cut off the sound output, press it again to restore the sound level. 3.DIGIT BUTTONS (0-9) If you want to select 0~99 program channel ,please press the digits buttons to enter the program channel directly.
9. PERSONAL PRESETS BUTTON (P.P.) You can select USER, STANDARD, SOFT or RICH mode by pressing this button. 10.RECALL BUTTON (RECALL) Press this button to return to the previously viewed channel. 11. DISPLAY BUTTON ( ) Press this button sequentially to display the current channel number on the screen. 12. SLEEP TIMER BUTTON ( ) Press the "Sleep Timer" button on your remote control to start setting the automatic sleep timer.
MENU SYSTEM This TV allows you to adjust the settings from the menu screens. * In the AV mode, menus appear the same as in TV mode except the install menu.
Turn the TV set on, then power indicator will light up. Press the program up or down button on the TV set,or press the on/off button on the remote control.The picture will appear after a few seconds . (If tuned on) The program number is displayed on the top right-hand corner of the screen. MENU BUTTON 1.Press this button to select menu. PICTURE, AUDIO, OPTION, CLOCK ,PRESET menu can be selected cyclically. Picture Menu Audio Menu Option Menu Clock Menu Preset Menu Exit 2.
Option menu OPTION LANGUAGE ENGLISH CALENDAR GAME LOTTERY BIOLOGY CLOCK 1. LANGUAGE You can change language menu in this item. 2. CALENDAR(option) (1).Press VOL.+/- Buttons to enter into CALENDAR menu. (2).Press PROG.+/- buttons to adjust Year, and press VOL.+/- Buttons to adjust Month. (3).Press MENU button to return. 3.Game (Option) Game is an optional function. Only a set with game can perform this function by using the remote control handset. - Press VOL.
Game 3: Russia Diamonds(Option) - Game Rules: Your goal is to clear the screen by fitting in the different sizes of blocks to a row horizontal aligned. One point will be received when one row is cleared. If two rows to be cleared at one time, you can get three points, while three rows cleared, seven points will be received. - Press the " PROG.+" button to revert the blocks. The " PROG.-" can accelerate the drop speed of the blocks.
Clock menu CLOCK _ _:_ _ TIME ON-TIME _ _:_ _ OFF-TIME _ _:_ _ _ _:_ _ ALARM BESPOKE TIME _ _:_ _ POSITION 1. TIME You can adjust the currently time by this item. Press the VOL+button set hour , and the VOL-button set minute . 2.ON-TIME Set the time when the TV set turn on . 3.OFF-TIME Set the time when the TV set turn off . 4.ALARM Go to ALARM time and select hour or minute with PROG+/- buttons. 5.BESPOKE TIME The TV will switch automatically to the channel selected in REMIND PROG at the BESPOKE TIME . 6.
TROUBLESHOOTING The following problems do not always indicate a hardware failure. Therefore, please use the troubleshooting guide below before calling for repair service. If, after following the guide none of the remedies work, unplug the TV and call for service. Problem Checks and Adjustments TV will not turn on Make sure the power cord is plugged in, then press POWER button. Check battery in the remote control. (Maybe batteries are dead.
Remote Control does not operate Check for any obstacle between the remote control and the remote control sensor window. Maybe batteries are dead. Try replacing batteries with new ones. Check for incorrect battery orientation. The picture is doubled or tripled (GHOST) Please change the direction, height or positionof the antenna. Reflections from building or mountains might cause this phenomenon. A highly directional antenna may improve the reception.
