Service manual

Operation Instructions
-30--
OPERATION INSTRUCTIONS
Picture Menu Sound Menu Features Menu Exit
MENU BUTTON
1.Press this button to select menu. PICTURE, SOUND, PRESET, TIME and SYSTEM can be selected
cyclically.
2.After enters each menu, you can select the item which you will adjust by PROG.+/- buttons, and adjust
this item by VOL. +/- buttons.
*The item which you select will change blue.
Timer Menu
You can select CONTRAST, BRIGHTNESS, COLOR, SHARPNESS, and TINT
item by PROG.+/- Buttons , and adjust the item which you select by
VOL.+/- Buttons.
*TINT is displayed only for NTSC and is not available for PAL or SECAM.
PICTURE
54
BRIGHTNESS 55
COLOR 60
SHARPNESS 50
TINT 00
CONTRAST
Picture menu
Turn the TV set on, then power indicator will light up. Press the program up or down button on the TV
set,or press the on/off button on the remote control.The picture will appear after a few seconds . (If tuned
on) The program number is displayed on the top right-hand corner of the screen.
Install Menu
Sound menu (Option)
SOUND
VOLUME 10
BASS 00
BALANCE 00
SURROUND OFF
TREBLE 00
SOUND MODE USER
In this menu you can adjust the tone of the TV output.
1. VOLUME
In this item,you can control the magnitude of the speakers output.
2.TREBLE
You can change the treble of thespeakers output.
3. BASS
You can change the bass of the speakers output.
4.BALANCE
You can control the balance of the two speakers output.
5.SURROUND
You can get the surround effect by turning this item on.
6. SOUND MODE
You can select present sount mode in this item.