Instructions / Assembly

7
© Selecto, Inc.
INSTALLATION PROCEDURES (CONTINUED)
For Rigid Plastic Pipe Installing (steps 6 to 13 of 13):
8. Repeat steps 2-7 for the outlet
side of piping
9. Apply sealant on 3/4” CPVC pipe 10. Reconnect plastic tting/clip
back to the lter head
11. Installed Plastic pipe
12. Install 1st cartridge w/align
4-tags
13. Now the installation is complete
Tap
Water
Inlet
Filtered
Water
Outlet
6. Re-install retaining blue clip
7. Hand press down the clip and
ush w/head surface