Instructions / Assembly

4
© Selecto, Inc.
INSTALLATION PROCEDURES
INSTALL FILTER HEAD:
For Hard Copper Pipe Installing (steps 1 to 5 of 10):
A. Filter Head Assembly
1. Center, level, and mount the
lter head
3. Pull and separate inlet Shut-Off
valve tting
2. Remove blue clip from inlet side
4. Connect inlet tting onto 3/4”
hard piping
B. You can slide the heads out toward either side of
channel to separate backplate for easy installation
5. Reconnect plastic tting back to
the lter head
Tap Water
Inlet
Filtered Water
Outlet