Operator`s manual

Operation

Starting the Generator

Remover all load from the AC power point and

switch power switch to the OFF position.

Turn the engine ON/OFF switch ON. Slide the fuel

valve lever to the “on” position and close the choke

lever. Do not use the choke if the engine is warm

or the air temperature is high.

Pull the starter grip gently until resistance is felt,

then pull it briskly and the engine should start.

Return the starter grip gently, do not allow it to

snap back or the starter may be damaged. If the

engine does not start repeat the process.

Open the choke fully when the engine is warm and

running smoothly.

Stopping the Engine

To stop the engine under normal circumstances,

switch AC breaker to off position, close the fuel

valve and turn the ignition switch off. In an

emergency the engine can be quickly stopped by

simply turning the ignition switch off.

AC Application

Start engine, ensure AC breaker switch is in the

OFF position and the appliance to be connected is

turned off.

Connect appliance, and switch AC breaker switch

to the ON position.

Now appliance is ready to use.

Control Panel

Starter Handle

ENGINE CONTROLS

Fuel Tap

Choke

Lever

Breaker

Switch

AC Power Point

Voltage Meter

Earth Terminal

Main Power

ON/OFF Switch

Circuit Breaker