Owner's Manual
Table Of Contents
- Installation Manual
- Installation type #1: 2007-2014 models with “standard" systems (Non Premium Infinity®/Alpine® systems, meaning no factory subwoofer in the cargo area)
- Installation type #2: 2015-2018 models with “standard” systems (Non Premium Infinity®/Alpine® systems,meaning nofactory subwoofer in the cargo area)
- Installation type #3: 2007-2018 models with Infinity®or Alpine® systems equipped with a factory subwoofer in the cargo area
6
Feed the harness wires up through
your driver side tweeter cavity…
7
…and have them exit the
tweeter cavity with plenty
of extra length coming out.
2015-2018 Wranglers:
make wires exit as shown.
8
Snap Driver side dash
panel back in place.
9
Remove glove box by squeezing
in the sides so the tabs clear and
pull the whole thing out.
Disconnect Passenger side speaker
enclosure.
10
Use your other wire harness and connect
to the back of the factory enclosure and
the dangling plug just like the Driver side.
11
Start feeding wires as shown,
under speaker.
12
13
Feed wires up and through
tweeter cavity, with plenty
of extra wire coming out.
2015-2018 Wranglers:
make wires exit as shown.