Owner's Manual

Later Models: If factory
amplifier on back of Driver-
Side enclosure is making it
tough to connect the plug:
Give the panel under the steering wheel a tug,
itll pop right off.
Use a 10mm socket and ratchet and remove the two
bolts holding this little metal plate on and remove plate.
Now you can more easily get to the plug. Attach one of the
wire harnesses that came with your pods in a similar fashion
as #4 image on previous page. Let wires fall to floor for now.
When youre done, put the metal plate back on and pop the
plastic cover back on.
A
B
C