Owner's Manual

Install the rubber grommet in the pre-drilled hole on

sidewall of the pod by pushing it in while picking it

through from the inside with your other hand.

Pull speaker wire through grommet. (If purchased

#31649KL with Kicker sub and amplifier, use the included

section of thick speaker wire not contained in the amp

wire kit.)

If purchased with Kicker sub included, we

recommend wiring it for 4 ohms.

Pull wires apart as much as needed to connect

pos.+ and neg.- for your particular subwoofer.

Showing Kicker shallow-mount sub wired

in 4 ohm configuration as example.

Gently pull excess wire while dropping sub

into pod. Situate to avoid wires touching sub

frame or pod walls as best as you can.

5 6