Operator`s manual

OBD 83
MANUAL SNAPSHOT
Press 1 to select <MANUAL SNAPSHOT> from the <SNAPSHOT> menu. The
<MANUAL SNAPSHOT> function captures a snapshot of data. Select <ALL>, <USER
DATA>, or <CUSTOM DATA> list for the snapshot capture.
DATA CAPTURE PHASE
The <LINE GRAPH> mode appears. Use the left and right keys to select the desired time
scale for the snapshot. <Wait: Manual Trigger> is displayed on the screen until the
snapshot is triggered. When a trigger occurs, <Trigger> is displayed while data is being
saved.
ACTIVE KEYS
l r Select snapshot capture time scale. Allowable time scales are 5, 10, 15, 30,
60, 100, 200, and 300 seconds.
u d Move the display up or down one parameter.
Au Move the display one page. (<DATA LIST> mode only.)
Ad
y Change the highlighted parameter to the next parameter in the list. (<LED/
LIST>, <BAR GRAPH>, <LINE GRAPH>, and <CUSTOM LIST> modes
only.)
n Change the highlighted parameter to the previous parameter in the list.
(<LED/LIST>, <BAR GRAPH>, <LINE GRAPH>, and <CUSTOM LIST>
modes only.)
AY Change to the next parameter not currently displayed. (<LED/LIST>, <BAR
GRAPH>, <CUSTOM LIST>, and <LINE GRAPH> modes only.)
AN Change to the previous parameter not currently displayed. (<LED/LIST>,
<BAR GRAPH>, <CUSTOM LIST>, and <LINE GRAPH> modes only.)
e Trigger the Snapshot and terminates data capture.
! Go to <DATA LIST> mode.
@ Go to <LED/LIST> mode.
# Go to <BAR GRAPH> mode.
$ Go to <LINE GRAPH> mode.
% Go to <CUSTOM LIST> mode.
( Change between large and compressed character size.
) Turn cursor on and off.
Ah Display parameter information.
s Print data list.