Operator`s manual

OBD 77
DTC INFO MENU
Press 2 to select <DTC INFO> from the <DIAGNOSTIC> menu. The <DTC INFO>
menu is displayed.
<1: CURRENT CODES> Display codes currently stored in the ECU.
<2: HISTORY CODES> Display history codes.
<3: PENDING CODES> Display codes.
<4: CLEAR CODES> Clear codes are currently stored in the ECU.
<5: REPAIR CONFIRM> Clear DTCs that were repaired by the technician.
ACTIVE KEYS
u d Change highlighted menu item.
1 - 5 Select menu item.
e Select highlighted menu item.
CURRENT CODES
Press 1 to select <CURRENT CODES> from the <DTC INFO> menu. Codes currently
stored in the ECU are displayed. The number of stored codes is displayed in the upper
right corner.
A "↓" in the upper right of the display indicates that there are more DTCs than can be
displayed at one time. Use the u and d keys to scroll through the list of received
Trouble Codes.
A "*" next to the Trouble Code ID indicates there is freeze frame data associated with that
DTC. If freeze frame data is available for the high-lighted DTC, press e to display
the <FREEZE DATA>.
ACTIVE KEYS
u d Move the highlight up or down.
Scroll through all Trouble Codes.
e Display Freeze Data.
FREEZE DATA
Freeze Data is only available for certain DTCs. The ECU stores up to two frames of data.
The Freeze Data is the state of the sensor and ECU outputs when the DTC was recorded.
The Tester displays all of the parameters saved with the DTC. The Freeze Data does not
change (it is static) and does not represent the current ECU state.
The Freeze Data is displayed in a data list format. Only the <DATA LIST> mode is
available for Freeze Data.
ACTIVE KEYS
u d Move the cursor (highlight) up or down.
AH Display parameter information.
x Return to Trouble Code review.